Front Wi-Fi Antenna - Lenovo 30GS001AGE Hardware Maintenance Manual

Removal steps
Step Screw (quantity)
1
M2 x 3 mm, Zn coated (1)
Note: During installation, ensure that you connect the gray cable to the connector labeled AUX on the card,
and the black cable to the connector labeled MAIN.

Front Wi-Fi antenna

Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
For access, remove these parts in order, if any:
• "Left side cover" on page 54
• "Side fan with bracket" on page 55
• "Secondary storage drive cage" on page 59
• "Secondary storage drive" on page 60
• "Storage drive in the front-access storage enclosure" on page 62
• "Front-access storage enclosure" on page 66
• "Front fan" on page 67
• "Front bezel" on page 68
88
P3 Tower Hardware Maintenance Manual
Torque
1.5 ± 0.2 lb/in