Table of Contents
Advertisement
DEALER PRE-DELIVERY CHECKLIST
AFTER COMPLETION, DEALER SHOULD REMOVE AND RETAIN FOR RECORDS
After the Rake has been completely set up, check to be certain it is in correct operating order before
delivering to the customer. The following is a list of points to inspect. Check off each item as you
have made the proper adjustments and found the item operating satisfactorily.
Rake was not damaged in shipment. Check for dents and loose or missing parts.
Report damage immediately to H&S Manufacturing Co., Inc.
Rake has been correctly assembled according to the set-up instruction document,
and instructions in this manual.
Wheel nuts are torqued per torque specifications.
All bolts and fasteners are tight.
All grease fittings have been lubricated. See Lubrication Chapter of this manual for
details.
Hoses and fittings are properly attached and there are no visible leaks.
All mechanisms are operating trouble free.
Rake wheels touch ground in unison when lowered into position (rake setting level).
Wheels are properly mounted.
Tires are inflated to correct pressure (ST205/75R15 - 25-30 PSI).
Decals are in place and legible.
Model Number
Serial Number
Dealer's Name
Inspection Date
Signature of Pre-Delivery Inspector
-5-
Advertisement
Table of Contents
