Advertisement
STEP 9 - Slide assembly
Connect Y3-1, Y3-2 and Y3-3 and secure with Z8 and Z6 as shown below.
IMPORTANT: Screw on the Z8 and the Z6 into the middle ridge (circled area)
FIRST. Then screw in the Z8 and Z6 into the side ridges of the slide. SECURELY
TIGHTEN the Z8 bolts after all 6 (SIX) of the Z8 slide bolts have been screwed in.
Z8
Z8
Z8
Z8
Z6
Z6
Z6
Z6
Y3-3
Z6
Y3-1
Y3-2
Z8
Z6
Z8
DO NOT RETURN TO RETAILER WHERE YOU PURCHASED AT.
26
CONTACT XDP FOR PARTS AND SUPPORT AT 1.866.884.0535 or service@xdprecreation.com
Advertisement
