XDP Recreation G SURF N SWING'IN Series Manual page 31

STEP 12 - Slide assembly (continued)
 Secure the two sides of the slide using Z2, Z6, Z21 and Z4, in the sequence
shown in the diagram.
 Attach X4-N to X1-N and X2-N and secure using Z1, Z6, Z3 and Z5 as shown in
the enlarged diagram.
Z1
Z6
Z3
Z5
NOTE:
1. Do not over-tighten the nuts and bolts at every step.
2. Do not snap in the cover of plastic cap until you have finished the assembly of
each step and went back to tighten all of the nuts and bolts.
CONTACT XDP FOR PARTS AND SUPPORT AT 1.866.884.0535 or service@xdprecreation.com
X4-N
X1-N
Z2
X1-N
X3-N
DO NOT RETURN TO RETAILER WHERE YOU PURCHASED AT.
X2-N
Z6
Z21
Z6
Z4
Z2
Z6
Y3-2
30