STEP 13 - Slide assembly (continued)
Fit Y1 in between X1-N and A11 and secure using Y1, Z2, Z6 and Z3, Z5.
Z5
Z3
X1-N
Y1
Z5
Z3
Z6
Z2
A11
A8
A8
NOTE:
1. Do not over-tighten the nuts and bolts at every step.
2. Do not snap in the cover of plastic cap until you have finished the assembly of
each step and went back to tighten all of the nuts and bolts.
DO NOT RETURN TO RETAILER WHERE YOU PURCHASED AT.
31
CONTACT XDP FOR PARTS AND SUPPORT AT 1.866.884.0535 or service@xdprecreation.com