XDP Recreation G SURF N SWING'IN Series Manual page 15

STEP 1 – Assemble the top bar frame of the swing set
 Connect A1, A2, A3, A4 and A5 and secure with B3, B4, B5 and B1 as shown
below.
Note: All round holes should be facing up and concave holes facing down.
B3
B4
B5
A1
B1
NOTE:
1. Do not over-tighten the nuts and bolts at every step.
2. Do not snap in the cover of plastic cap until you have finished the assembly of
each step and went back to tighten all of the nuts and bolts.
CONTACT XDP FOR PARTS AND SUPPORT AT 1.866.884.0535 or service@xdprecreation.com
B3
B4
B5
A3
A2
B1
DO NOT RETURN TO RETAILER WHERE YOU PURCHASED AT.
B3
B4
B5
A4
B1
B3
B4
B5
A5
B1
14