XDP Recreation G SURF N SWING'IN Series Manual page 16

STEP 2 – Assemble the support legs of swing set
 Connect A1 to A7 and secure using B1, B5, B4 and B3 as shown below.

Repeat this step for the middle section of the swing set (A3 and A5 with A7).
A8
NOTE:
1. Do not over-tighten the nuts and bolts at every step.
2. Do not snap in the cover of plastic cap until you have finished the assembly of
each step and went back to tighten all of the nuts and bolts.
CONTACT XDP FOR PARTS AND SUPPORT AT 1.866.884.0535 or service@xdprecreation.com
B1
B5
A7
DO NOT RETURN TO RETAILER WHERE YOU PURCHASED AT.
A1
B4
B5
B3
B1
A7
A8
15