Step 10 - Glide Ride Assembly - XDP Recreation 86900 Manual

STEP 10 - Glide ride assembly

 Attach L4 and L3 to A4 using N3R, L5
and N7 as shown. Use special socket
wrench and screw driver to tighten N3R and N7.
STEP 11 – Glide ride assembly (continued)
 Insert L2-N (straight end) into L1-N and
secure with N13-1, N14, N6 and
N15 on both sides as shown below.
 Repeat the above steps on the other side.
CONTACT XDP FOR PARTS AND SUPPORT AT 1.866.884.0535 or service@xdprecreation.com
N6
N15
N14
DO NOT RETURN TO RETAILER WHERE YOU PURCHASED AT.
L5
N7
USE SPECIAL
SOCKET WRENCH
AND SCREW DRIVER
TO TIGHTEN N7.
L1-N
N14
N13-1
L2-N
N3R
L4
A4
L3
L5
N7
29