XDP Recreation G SURF N SWING'IN Series Manual page 28

 Connect X7-N and X8-N together first then place the tubes into the grooves on
the back of the slide as shown below.
 Secure X7-N and X8-N onto the slide with Z10, Z6 and Z9 in the sequence blocks
as shown below.
ONLY securely tighten Z10 bolts after you have screw on ALL 10 (TEN) Z10 blots.
X7-N
3
CONTACT XDP FOR PARTS AND SUPPORT AT 1.866.884.0535 or service@xdprecreation.com
X7-N
Z10
Z6
Z9
1
DO NOT RETURN TO RETAILER WHERE YOU PURCHASED AT.
X8-N
X8-N
5
2
4
27