XDP Recreation G SURF N SWING'IN Series Manual page 17

STEP 3 – Attach the crossbar to the support legs
 Attach A10 to the outer side of A7 & A8 and secure using B2, B6, B4 and B3.

Repeat this step for the middle section of the swing set (A3 with A10).
A1
A7
A7
B6
B3
B4
B2
A10
B3
B4
B6
A8
B2
A8
NOTE:
1. Do not over-tighten the nuts and bolts at every step.
2. Do not snap in the cover of plastic cap until you have finished the assembly of
each step and went back to tighten all of the nuts and bolts.
DO NOT RETURN TO RETAILER WHERE YOU PURCHASED AT. 16
CONTACT XDP FOR PARTS AND SUPPORT AT 1.866.884.0535 or service@xdprecreation.com