Table of Contents
Advertisement
Icon Details
Mode Button: Pressing the mode button toggles between the various available functions: flame height, fan
speed, accent light intensity and rear burner on/off.
Flame Height: Six flame height levels are available. While the flame height icon is
displayed, pressing the up or down button once will increase or decrease the flame
height by one of six increments.
If the flame height is at Level one and the down button is pressed, all burners will
turn off.
If in IPI mode, the pilot will also extinguish.
If in CPI mode, the pilot will remain on.
Note: If in Smart Thermostat, the flame height function is not available for manual adjustment.
In Smart Thermostat, the flame height regulates automatically.
Fan Speed Control: The fan speed can be adjusted through six speeds and off. To
activate this function, press the Mode button until it displays the fan icon. Use the
up/down arrow button to turn on, off, or adjust the fan speed. Once you set the
desired fan control, the system will remember your selected fan speed until you
manually change it.
Accent Light: This function controls the accent light functions. Pressing the UP
button in this mode will turn on the accent light and allow you to control the 6
levels of intensity. Once you set the desired light intensity, the system will
remember your selection until you manually change it.
Rear Burner: This function controls the rear burner on/off feature. Pressing the
up button in this mode will turn on the rear burner and pressing the down
button will turn off the rear burner. The flame height of the front burner will not
change when you turn the rear burner on or off. The flame height can only be
changed in the Flame Height mode.
85-03-01113
DXV35DT4
Page 68
Advertisement
Table of Contents
