Table of Contents
Advertisement
HOMEOWNER INFORMATION
Welcome to Mendota. We are proud to be the makers of world-class direct vent fireplaces and Fireplaces. We understand that
a fireplace is a long-term investment, and we are happy you have chosen us to be a part of your family. We are committed to
quality and satisfaction for all Mendota owners. Thank you for choosing a Mendota to be a source of comfort and beauty in
your home.
We have designed this manual to help you enjoy all that your Mendota Fireplace has to offer. You will find tips, operating
instructions, and frequently asked questions to support the features and functions of your Fireplace.
We want you to enjoy your Mendota for years to come. If you have any additional questions regarding operation of your
Fireplace, please contact your Mendota local dealer.
5.1 AESTHETIC CONSIDERATIONS
Burning or static fireplaces are a major aesthetic focus in any room. In addition to offering the most realistic log details,
textures, coloration and the most realistic wood fire options, Mendota also offers a large array of internal firebox lining options
and external decorative options. Visit
available.
5.2 HEATING PERFORMANCE
Mendota's high heat output Fireplace will heat a large area of your home. Air movement options for maximizing heat
circulation that can be considered are operating the Fireplace's convection blowers, continuous operation of central heating
furnace blowers or room ceiling fans. The heat output of the fireplace can be reduced by turning off the Rear Burner and
reducing flame height using the remote control. Blowers can be turned down or turned off to reduce heat distribution.
5.3 IMPORTANT INFORMATION FOR HOMEOWNER
Before you begin operation of your Gas Fireplace Heater, read and familiarize yourself with information provided in the
following chapters of this manual:
Using Your Remote Control
Your Mendota remote control is pre-programmed to your fireplace. Ensure you have
installed 3 AAA batteries into your remote.
Press the top button on the remote control. If you do not hear a beep when you press this
button, follow the instructions below to synchronize your fireplace and remote control.
Synchronizing the Fireplace and Remote Control
Note: The master switch and sync switch are located at the bottom behind the lower grill.
Master Switch" The master switch acts as the main safety on/off control for
the main gas burners only. When the master switch is in the off-condition,
the main gas burners will not turn on. However, all other fireplace
functions, including the Continuous Pilot Mode (CPI), will operate. When
the master switch is in the on-condition, the main burners will function as
designed.
In case of an emergency, toggle the master switch to off to turn off the main burners.
To synchronize the fireplace and remote control, follow the steps below:
Toggle the master switch to "on" (toggle up).
1.
Locate sync switch (above master switch in the right-side air gap). Press the sync button and release. The fireplace will beep
2.
three times indicating that it is ready to synchronize with a remote control. (Note: If you do not hear any beeps when you
press the sync button, contact your Mendota dealer or installer for assistance.)
Within seven seconds, press the "on" button on the remote control. The fireplace will beep four times to indicate that the
3.
remote control's command is accepted and sets to the particular code of that controller.
Your system is now initialized.
85-03-01113
www.mendotahearth.com
DXV35DT4
and your local Mendota dealer's show room to view all options
Page 65
Advertisement
Table of Contents
