Table of Contents
Advertisement
Backup DC Power Supply Information
OPERATING DURING POWER OUTAGES
This electronic ignition system utilizes the supplied 110VAC power when it is available for all functions of this system. If the AC
power is interrupted during a power outage, locate the backup battery holder on the far-right side of the courtesy panel behind
the lower grill. Using ¼" hex driver or a flat screw driver, remove two screws and remove the battery pack holder. Insert four
fresh AA batteries in the battery pack and operate the appliance.
During the power outage, the appliance's burners will function. In addition, Flame Height adjustment and Secondary Burner
ON/OFF functions will be available. The Fan and Accent Light, which are wholly dependent on 110VAC power, will not function.
This appliance is designed and tested to be operated during power outages.
You may operate this appliance indefinitely on battery power as long as you accept that high capacity DC 6-volt batteries will be
required to sustain uninterrupted DC power to this appliance and that the blower function and accent light functions will not be
available
Figure 3-32 Backup Battery Pack
.
Page 40
85-03-01113
DXV35DT4
Advertisement
Table of Contents
