Table of Contents
Advertisement
12
Fuel / Oil System
The fuel tank on your Pro Line is made of heavy gauge plastic with internal baffling to
minimize sloshing. The tank is vented overboard, inspect the vent for obstructions
regularly. 'Deck plate' access ports are placed over the hose connections and the sending
unit. Inspect the hose connections on a regular basis, and if you notice fuel odor or see
fuel in the bilge there may be a leak somewhere in the fuel system. Correct before
operating vessel.
Water separator / filter units are located in the bilge. The spin on cartridges should be
changed at least seasonally, more often depending on use and conditions.
It is imperative that the oil supply remain clean and uncontaminated by water or dirt.
Electrical
Direct Current
12 volt direct current provides electrical power for all lighting, pumps, electronics, and
DC devices. A main breaker panel is located under the starboard transom hatch.
The main helm terminal panel is accessed through the hatch on aft side of console.
Aftermarket Accessories
Your Pro Line's electrical system was designed for factory tested and approved dealer
installed optional accessories. Pro Line makes no recommendations to the suitability of
accessories that are not listed in the Pro Line sales literature . Any unapproved
modifications or additions to the standard or optional system are done at the owners risk
and void the warranty. Unapproved modifications could cause risk of fire or failure of the
electrical system.
Advertisement
Table of Contents
