Table of Contents
Advertisement
Starting
Follow the information in your engine manual if it deviates from the following
instructions.
Before Starting Engine-
* Ventilate all enclosed spaces.
* Visually inspect bilge for raw fuel, smell for vapors.
* Visually make sure propeller is clear of obstructions or swimmers.
* Make sure engine cooling water intakes are submerged.
* Lock helm seats to face straight forward.
* Attach safety lanyard.
Start the engine in accordance with the manufactures recommendations. After your
engine starts make sure to observe a few basic rules to ensure that the engine is
functioning properly:
* Verify engine cooling water circulation.
* Check the water temperature gauge for the first few minutes to make
sure the engine is warming properly.
* Check for leaks especially fuel, shut down and correct if found.
* Follow the break- in procedures for your engine.
After engine is warm and after the necessary break- in, drive the boat at full
throttle for a few moments ( if conditions permit) to verify engine is
developing full RPM.
16
Advertisement
Table of Contents
