Sea Water System; Fuel / Oil System - Pro-Line Boats Pro Line 19 Sport Owner's Manual

Systems

Sea Water System

The bait-well switch controls a pump mounted on a seacock in the bilge. An overflow
tube is provided that is inserted into the drain to allow circulation to keep bait alive. The
wash down pump is mounted just above the bilge pump in the bilge. The pump is
equipped with a pressure switch. Turn the main switch off if the pump is not going to be
used soon. Raw water is taken in by the thruhull fitting with a seacock. A strainer on the
pump filters the raw water. The filter must be cleaned as needed to avoid pump damage.
Seacocks on all below water line fittings should be closed when not in use.
Baitwell / Washdown Pump
Raw Water Filter, Sea-cock (shown in the open position), Bilge Pump
Bait-well/Wash-down

Fuel / Oil System

The fuel tank on your Pro Line is made of heavy gauge aluminum with internal baffling
to minimize sloshing. The tank is vented overboard, inspect the vent for obstructions
regularly. 'Deck plate' access ports are placed over the hose connections and the sending
unit. Inspect the hose connections on a regular basis, and if you notice fuel odor or see
fuel in the bilge.
Water separator / filter units are located in the bilge. The spin on cartridges should be
changed at least seasonally, more often depending on use and conditions.
Pro Line boats equipped with oil injected outboard engines have onboard oil tanks.