Set-Up, Connection And Initial Start-Up; Choosing A Suitable Location; Positioning; Having The Outlet Hose Connected - Hanseatic HG5544D63602EW User Manual

Set-up, connection and initial start-up

Choosing a suitable location

CAUTION
Risk of injury!
The appliance is heavy and bulky. Im-
proper handling of the appliance may
lead to injuries.
■ Seek the help of another person dur-
ing transport, installation and assem-
bly.
■ If a trolley is used to move the appli-
ance, the appliance must be moved
as shown on the packaging.
■ Only lift the appliance as shown on
the packaging.
■ Remove all obstacles on the transport
route and from the installation loca-
tion, e.g. open doors and clear away
objects lying on the fl oor.
The planned location must fulfil the following
prerequisites:
– The location must be a dry and frost-safe
room with a firm ground.
– In order to install the connection pipes, the
dishwasher must be positioned near to a
washing/dishwashing basin or the floor
drain.

Positioning

You can position the dishwasher on a work-
top or in a row of kitchen units.
The location must
– be suitable for a total weight of 21.5 kg.
– be of the following size:
Height min. 438 mm
Width min. 550 mm
Depth min. 500 mm
Set-up, connection and initial start-up
Having the outlet hose
connected
NOTICE
Malfunction!
Failing to connect the appliance cor-
rectly may cause malfunctions during
operation.
■ Make sure that the waste water can
drain freely at any time. To that end,
the outlet pipe must have a minimum
diameter of 40 mm.
■ Ensure that there are no kinks or dam-
age to the outlet hose.
■ Make sure that the end of the hose is
not submerged in the pumped water.
■ Do not extend the outlet hose or re-
place with another outlet hose.
You can connect the end of the outlet hose in
two different ways:
– Connection to a floor drain.
– Direct connection to the odour seal (si-
phon) of your washing/dishwashing basin.
Technical measures are required for this.
For this reason, only plumbing experts or
members of our Service department may
connect the outlet hose (see page EN-34).
The outlet hose must be a maximum of
1000 mm above the floor.
Page EN-27
B
A
Ø 40 mm