Explanation Of Terms And Symbols; Definitions; Explanation Of Terms/Symbols; Definitions - Hanseatic HG5544D63602EW User Manual

Explanation of terms and symbols; definitions

Please read through the safety
notices and the user manual
carefully before using the appli-
ance. This is the only way you can use all
the functions safely and reliably.
Be sure to also observe the national reg-
ulations in your country, which are valid in
addition to the regulations specified in this
user manual.
Keep all safety notices and instructions
for future reference. Pass all safety notic-
es and instructions on to the subsequent
user of the product.

Explanation of terms/symbols

The following symbols can be found in this
user manual.
WARNING
This symbol indicates a hazard with a medi-
um level of risk which, if not avoided, could
result in death or serious injury.
CAUTION
This symbol indicates a hazard with a low lev-
el of risk which, if not avoided, could result in
minor or moderate injury.
NOTICE
This symbol warns against possible damage
to property.
This symbol refers to useful additional
information.
Explanation of terms and symbols; definitions

Definitions

'Place setting' means a set of tableware in-
tended for use by one person, excluding serv-
ing dishes.
'Operating cycle' means a complete cleaning,
rinsing and drying cycle, depending on the
selected programme, covering a series of op-
erations until the end of all activities.
'Programme duration' means the period from
the start of the selected programme, without
any preset time programmed by the user, until
the notification of the end of the programme,
from which point the user has access to the
tableware.
'Preset time' means a state in which the user
has postponed the start of the operating cy-
cle of the selected programme for a certain
period of time.
Page EN-3