After-Cleaning Care - Bissell REVOLUTION HYDROSTEAM 3424 Series Manual

Cleaning with the Hose and Tool (continued)
3" and 6" Tool
1. Point tool above spot or 2. Release spray trigger and
stain and press spray trigger. gently scrub the stain.
3-in-1 Stair Tool
a
b
1. Twist tool to desired 2. Use to clean stairs three ways:
position. The downward facing a. Flat edge: stair tread
edge is the active cleaning b. Indented area: outer corner
mode. c. Pointed edge: inner corner

After-Cleaning Care

For more helpful maintenance tips, check out support.BISSELL.ca.
Emptying the Dirty Water Tank
Note: When the tank is full, the float will shut off suction and emit a high-pitched sound indicating it is
time to empty your tank.
1. To release dirty water tank, 2. Remove tank and carry to
press down on tank handle and disposal area.
tilt tank toward you.
8 BISSELL.ca
c
3. Point the tool about 1 inch
above the stain and press the
spray trigger. Suction the stain
by placing tool onto surface
and slowly moving backwards.
3. Unlock by rotating handle
back.