Bissell REVOLUTION HYDROSTEAM 3424 Series Manual page 10

After-Cleaning Care (continued)
Using the Rinse and Storage Tray (select models)
C
A
B
1. There are 2 hooks on each 2. Place machine on tray and
side of part A that hook under open hose door on foot.
part B. Press B down onto
A. The water cup (C) can be
stored on the side of the tray.
30s
4. With hose tool door open, 5. Close hose tool door. Press
recline machine and press power button to turn ON and
power button to turn ON. Run run until all water is picked up.
for 6-8 seconds to rinse brush Repeat steps 3-4 until foam is
rolls. completely rinsed. Press power
button to turn machine OFF.
Storing Your Machine
Once your cleaning is complete, make sure both the dirty and clean water tanks are emptied, rinsed
out, and dried before the next use. Wrap cord around cord wrap for storage. Store machine in a
protected, dry area.
10 BISSELL.ca
3. Fill rinse cup with fresh tap
to the fill line printed on cup.
Pour water into tray as shown.
30s