Bissell REVOLUTION HYDROSTEAM 3428 Series Manual
Bissell REVOLUTION HYDROSTEAM 3428 Series Manual

Bissell REVOLUTION HYDROSTEAM 3428 Series Manual

Upright carpet cleaner with steam
Hide thumbs Also See for REVOLUTION HYDROSTEAM 3428 Series:

Advertisement

REVOLUTION® HYDROSTEAM®
UPRIGHT CARPET CLEANER WITH STEAM
3424, 3428, 3432 SERIES
What's in the Box? ............................................ 3
Assembly .............................................................. 3
Controls and Cleaning Modes ...................... 3
Filling the Clean Water Tank......................... 4
Three Modes of Cleaning ............................... 5
Cleaning with the Hose and Tool ................ 7
After-Cleaning Care ......................................... 8
Replacing the Belts and Brush Rolls .........11
Troubleshooting .................................................11
Warranty ...............................................................11
Product Overview
1. Handle with Fingertip
Controls
2. Clean Water Tank
Carry Handle
3. Clean Water Tank
4. Dirty Water Tank
Carry Handle
5. Machine Carry Handle
6. Dirty Water Tank
7. Mode Indicator Lights
8. Accessory Hose Door
9. HydroSteam Bar
10. EdgeSweep® Brushes
11. Formula & Steam
Spray Trigger
12. Quick Release™
Cord Wrap
13. Recline Pedal
Meet your new BISSELL® product!
Go to support.BISSELL.com for a walkthrough of your new purchase,
including videos, tips, support, and more. Want to get started right
away? This guide has all the information you need to set up your new
product. Let's take a look...
1
2
3
4
5
6
7
8
9
10
11
12
13

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the REVOLUTION HYDROSTEAM 3428 Series and is the answer not in the manual?

Questions and answers

edward lulkovitz
March 16, 2025

no suction

1 comments:
Mr. Anderson
March 16, 2025

The Bissell REVOLUTION HYDROSTEAM 3428 Series may have no suction because the dirty water tank is full. When the tank is full, the float shuts off suction and emits a high-pitched sound, indicating that it needs to be emptied. To restore suction, empty the dirty water tank by pressing down on the tank handle, removing the tank, carrying it to a disposal area, and unlocking it by rotating the handle back.

This answer is automatically generated

James Hazelton
March 21, 2025

my daughter tour the whole thing apart. many peices. i need to know how it goes back together. i dont have a image.

Summary of Contents for Bissell REVOLUTION HYDROSTEAM 3428 Series

  • Page 1 7. Mode Indicator Lights Meet your new BISSELL® product! Go to support.BISSELL.com for a walkthrough of your new purchase, including videos, tips, support, and more. Want to get started right away? This guide has all the information you need to set up your new...
  • Page 2: Important Safety Instructions

    • With brush roll on, do not allow cleaner to sit in one location for an extended period of time, as damage to floor can result. 2 BISSELL.com...
  • Page 3: What's In The Box

    • Blood • Grease • Blood • Jelly • Urine • Vomit • Urine • Caramel/ Chocolate • Syrup • Juice • Baby Food Sauce • Wine • Spaghetti Sauce • Mud/Dirt Do not use on blood or urine BISSELL.com 3...
  • Page 4: Filling The Clean Water Tank

    PRO OXY Urine Eliminator, Oxy Boost, Pet Oxy Boost, Simply Carpet Deep Clean, Clean + Allergen, Pro Oxy Deep Clean WARNING To reduce the risk of fi re and electric shock due to internal component damage, use only BISSELL cleaning formula intended for use with this machine. 4 BISSELL.com...
  • Page 5 The motor stain for 20 seconds. SteamWash Max mode. will turn off and the brush rolls will stop spinning. Icon will blink until heater is ready to make steam. CONTINUED ON NEXT PAGE BISSELL.com 5...
  • Page 6 While holding pushing machine forward machine. trigger, make two “wet and back across carpet passes,” moving machine until water can no longer forward and back across be seen in nozzle. carpet. 6 BISSELL.com...
  • Page 7: Attaching The Hose

    Release trigger and suction up the stain. machine ON. Cleaning the 2-in-1 Upholstery Tool 1. Twist dirt cup to open. 2. Rinse dirt bin. Let dry Empty into a garbage bin. completely before reinstalling. CONTINUED ON NEXT PAGE BISSELL.com 7...
  • Page 8: Emptying The Dirty Water Tank

    6. Reinstall tank. Insert on both sides and pull up to utility sink. bottom first. Then, tilt tank toward machine and push top remove. Reinstall lid and rotate handle in until it clicks into place. forward to lock in place. 8 BISSELL.com...
  • Page 9: Cleaning The Machine

    CONTINUED ON NEXT PAGE WARNING To reduce the risk of injury, do not touch the steam cleaning nozzle or adjacent surfaces when steam-cleaning or when the nozzle is heated. BISSELL.com 9...
  • Page 10 Once your cleaning is complete, make sure both the dirty and clean water tanks are emptied, rinsed out, and dried before the next use. Wrap cord around cord wrap for storage. Store machine in a protected, dry area. 10 BISSELL.com...
  • Page 11: Troubleshooting

    Note: Any other servicing should be performed by an authorized service representative. Warranty Limited 5-year warranty, may vary by state. Visit support.BISSELL.com or call 1-800-237-7691 for complete warranty information. WARNING To reduce the risk of injury, do not touch the steam cleaning nozzle or adjacent surfaces when steam-cleaning or when the nozzle is heated.
  • Page 12 We’re Waggin’ Our Tails! BISSELL proudly supports BISSELL Pet Foundation® and its mission to help save homeless pets. When you buy a BISSELL® product, you help save pets, too. We’re proud to design products that help make pet messes, odors, and pet homelessness disappear.

Table of Contents