Bissell REVOLUTION HYDROSTEAM 3424 Series Manual page 9

After-Cleaning Care (continued)
4. Grab lid in recessed area 5. Empty dirty water into
on both sides and pull up to utility sink.
remove.
Reinstall lid and rotate handle
forward to lock in place.
Cleaning the Machine
Nozzle may be HOT. Let machine cool before touching.
1. Place fingertips into grips 2. Open hose door. Rinse
on both sides of nozzle. Press nozzle with warm water.
release buttons with thumbs Remove debris with clean
and rotate nozzle to remove. out tool. Note: Parts are not
dishwasher or automatic
washing machine safe.
4. Check steam bar for clogs. 5. Let nozzle dry before
Wipe underside of steam bar reassembling. Reinstall nozzle
with a wet towel or manually by first lining up tabs with
remove visible clogs if grooves of foot. Rotate nozzle
necessary. back into place until you feel
two clicks.
WARNING
To reduce the risk of injury, do not touch the steam cleaning nozzle or adjacent surfaces when
steam-cleaning or when the nozzle is heated.
6. Reinstall tank.
Insert
bottom first. Then, tilt tank
toward machine and push top
in until it clicks into place.
3. If brush roll chamber is dirty,
clean with a cloth.
CONTINUED ON NEXT PAGE
BISSELL.ca 9