Cleaning With The Hose And Tools - Bissell REVOLUTION HYDROSTEAM 3424 Series Manual

Cleaning with the Hose and Tool
For information on all tools, refer to the Tool Instructions insert.
Note: Only water and formula flows through hose and tool, not steam.
Attaching the Hose
1. Lift accessory hose door 2. Insert hose until it clicks into
on top of foot on the front of place. Be sure colored hose
machine. Flip door toward release clip is facing out, away
machine to open. from machine.
Attach tool to end of hose.
2-in-1 Upholstery Tool
Dry
Suction
Channel
1. Switch between 2a. Dry Cleaning
Dry and Wet
Vacuum up debris from
settings and turn
carpet or upholstery.
machine ON.
Cleaning the 2-in-1 Upholstery Tool
1. Twist dirt cup to open. 2. Rinse dirt bin. Let dry
Empty into a garbage bin. completely before reinstalling.
Wet
Suction
Channel
2b. Wet Cleaning
Hold down trigger to activate spray. Release
trigger and suction up the stain.
CONTINUED ON NEXT PAGE
BISSELL.ca 7