Advertisement
PROHEAT 2X® REVOLUTION® PET
UPRIGHT CARPET CLEANER
MODEL 3631F
What's in the Box? .........................................................3
Assembly ..............................................................................3
Filling the Formula Tank .............................................4
Cleaning Carpets and Area Rugs ........................5
Cleaning with Hose and Tools ................................ 7
Emptying the Dirty Water Tank ............................9
After-Cleaning Care ......................................................9
Replacing the Belts and Brush Rolls ................10
Troubleshooting ...............................................................11
Limited Warranty ...........................................................12
Product Overview
1. Upper Handle
2. Spray Trigger
3. Cord Clip
4. Easy Fill / Formula Cap
5. Clean Water Tank
6. Carry Handle
7. Cleaning Mode Switch
8. Power Button
9. Dirty Water Tank
10. Float Stack
11. CleanShot® Button
12. Recline Pedal
13. Belt Access Door
14. Nozzle
15. Foot
1
4
5
7
9
10
11
12
14
2
3
6
8
13
15
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Bissell PROHEAT 2X REVOLUTION PET
Summary of Contents for Bissell PROHEAT 2X REVOLUTION PET
- Page 1 PROHEAT 2X® REVOLUTION® PET UPRIGHT CARPET CLEANER MODEL 3631F What’s in the Box? ............3 Assembly ................3 Filling the Formula Tank ..........4 Cleaning Carpets and Area Rugs ......5 Cleaning with Hose and Tools ........ 7 Emptying the Dirty Water Tank ......9 After-Cleaning Care ............9 Replacing the Belts and Brush Rolls ....10 Troubleshooting ...............11...
- Page 2 Use a Phillips-head tank with grooves and liquids, such as petroleum, or use in areas where they the cleaning process. Use only BISSELL® cleaning until it clicks into screwdriver to insert screw (taped to handle).
- Page 3 *Compatible BISSELL formulas include: Pro Stain & Odour, Pet Stain & Odour, Stain & Odour, Ambipur Blossom & Breeze, Pet Urine Note: MAX or DEEP Clean Mode needs an estimated 8 hours to dry. Use a fan in the room or near the Eliminator + Oxy, Allergen, Wash &...
- Page 4 Cleaning with Hose and Tools Cleaning Carpets and Area Rugs (continued) Tools vary by model. Visit global.BISSELL.com for additional tools. Using CleanShot® Pretreater on Tough Stains and Messes With machine reclined, press Maneuver machine and Press the button with your...
-
Page 5: Emptying The Dirty Water Tank
Emptying the Dirty Water Tank Cleaning with Hose and Tools (continued) For more helpful tips, check out global.BISSELL.com. Stain Trapper Tool Important: The float stack prevents your dirty tank from overflowing. Press tank handle Empty tank. Quick empty: Pull rubber tab and tilt to... -
Page 6: Troubleshooting
Troubleshooting Replacing the Belts and Brush Rolls Scan the QR code or visit support.BISSELL.com for videos. Below are some of the issues you may run into. If you don’t see the issue you’re experiencing below, visit global.BISSELL.com. Problem Possible Cause... -
Page 7: Limited Two-Year Warranty
It gives you specific rights. It is offered as an additional benefit to Except as set out below, BISSELL and its distributors are not liable for any your rights under law. You also have other rights under The Australian...
Need help?
Do you have a question about the PROHEAT 2X REVOLUTION PET and is the answer not in the manual?
Questions and answers
The diaphragm at the bottom of the water tank has come loose - how do I Get inside to place it back
To access the water tank of the Bissell Revolution Pet and reattach the loose diaphragm:
1. Unplug the machine.
2. Remove both the clean and dirty water tanks.
3. Pick up the 2-in-1 water tank by the handle and ensure it is properly seated on the unit.
4. Check that both tank latches are securely latched.
5. If needed, open the tank to inspect the diaphragm area and remove any debris.
6. Reattach the diaphragm if it is loose, ensuring it moves freely.
7. Refill the tank with clean hot tap water if empty.
8. Reseat the tank securely on the unit.
Make sure the red float door is not stuck in the closed position.
This answer is automatically generated
When using stair attachment a lot water leaks from brush section.
Water may leak from the brush section when using the Bissell Revolution Pet stair attachment if the hose is ripped, disconnected, or not properly connected. Bubbling at the front hose connection area can also indicate a leak. These issues can cause water to escape from unintended areas like the brush section.
This answer is automatically generated
My cleanshot button--which has worked before is stuck in the "on position". The window shows both red and green backgrounds--stuck in between them. How do I move it again? I have the Bissel 2x Revolution **** model
Press the CleanShot button to turn it off. The button window should show the color red and an "O" symbol when it is in the OFF position.
This answer is automatically generated