Rename or Unpair a Paired Device
You can rename a paired device to make it easier to identify on the list or unpair the
device to remove it from the paired list.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. Tap
4. Take one of the following actions:
About the Scanner Edge App
Your mobile computer is equipped to communicate with scanners using Bluetooth
technology through the Scanner Edge app. The Bluetooth radio must be turned on.
System bar icons indicate Bluetooth radio status.
To turn on the Bluetooth radio:
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. If necessary, tap Off
Connect a Bluetooth Scanner
To connect to a Bluetooth scanner, the Bluetooth radio must be turned on and then
scan a pairing barcode with the Bluetooth scanner.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Scanner Edge
3. Tap the menu icon
4. For Honeywell branded scanners tap Honeywell or for Intermec branded
5. Scan the Scan to connect barcode displayed on screen.
60
> Connected devices.
next to the paired device.
•
To rename the device, tap
name, and then tap Rename.
•
To allow Internet access or Contact Sharing, tap the setting.
To unpair the device, tap Forget.
•
> Connected devices > Bluetooth.
scanners tap Intermec.
to open the Device name screen. Type the new
to toggle the Bluetooth radio On
.
and then tap Pair BT Scanner.
Thor VM1A Vehicle-Mounted Computer
.