Dock I/O Pin Cover
•
•
Padlock
It may be desirable to secure the VM1A in the dock so it cannot be removed from
the dock. The quick release handle on the computer is notched to allow a user sup-
plied small padlock to be placed through a hole in the bracket on the back of the
computer in the location shown below. Once the padlock is installed, the release
handle cannot be moved so the VM1A cannot be removed from the dock. The pad-
lock shackle must be smaller than 3/16" (4.76mm).
A cable tie wrap can be used instead of a padlock, if desired.
76
When the computer is not installed in the dock, use the I/O Pin Cover to protect
the pins on the dock, as shown.
When the computer is installed in the dock, the I/O Pin Cover can be placed out
of the way behind the dock.
Thor VM1A Vehicle-Mounted Computer