Lexmark MB2236 User Manual page 35

Set up, install, and configure
Using the personal identification number (PIN) method
1
From the control panel, navigate to:
Settings > Network/Ports > Wireless > Wi‑Fi Protected Setup > Start PIN Method
For non-touch-screen printer models, press
2
Copy the eight‑digit WPS PIN.
3
Open a web browser, and then type the IP address of your access point in the address field.
Notes:
•
To know the IP address, see the documentation that came with your access point.
•
If you are using a proxy server, then temporarily disable it to load the web page correctly.
4
Access the WPS settings. For more information, see the documentation that came with your access point.
5
Enter the eight‑digit PIN, and then save the changes.
Connecting a mobile device to the printer wireless network
1
Enable Wi‑Fi Direct
Settings > Network/Ports > Wireless > Enable Wi‑Fi Direct
For non-touch-screen printer models, press
Notes:
•
The Wi‑Fi Direct SSID and password are generated automatically. To view the Wi‑Fi Direct SSID and
password, go to the Wi‑Fi Direct menu.
•
You can also change the SSID and password, if necessary.
2
Connect your mobile device to the printer wireless network.
Deactivating the Wi‑Fi network
1
From the printer control panel, navigate to:
Settings > Network/Ports > Network Overview > Active Adapter > Standard Network
For non-touch-screen printer models, press
2
Follow the instructions on the display.
Checking the printer connectivity
1
Print the Network Setup Page.
From the control panel, navigate to:
Settings > Reports > Network > Network Setup Page
For non-touch-screen printer models, press
2
Check the first section of the page and confirm that the status is connected.
If the status is not connected, then the LAN drop may be inactive or the network cable may be unplugged
or malfunctioning. Contact your administrator for assistance.
®
in the printer. From the home screen, navigate to:
to navigate through the settings.
to navigate through the settings.
to navigate through the settings.
to navigate through the settings.
35