Lexmark MB2236 User Manual page 34

Set up, install, and configure
Using Lexmark Mobile Assistant
1
Depending on your mobile device, download the Lexmark Mobile Assistant application from either the
TM
Google Play store or App Store online store.
2
Depending on your printer model, do one of the following:
•
From the home screen, touch Settings > Network/Ports > Wireless > Setup Using Mobile App > Printer
ID.
•
From the control panel, navigate to:
> Network/Ports >
Follow the instructions on the display to view the printer ID.
Note: The printer ID is the printer wireless network SSID.
3
From your mobile device, launch the application, and then accept the Terms of Use.
Note: If necessary, grant permissions.
4
Tap Connect to Printer > Go to Wi‑Fi Settings.
5
Connect your mobile device to the printer wireless network.
6
Return to the application, and then tap Setup Wi-Fi Connection
7
Select a Wi-Fi network, and then type the network password.
8
Tap Done.
Connecting the printer to a wireless network using Wi‑Fi Protected Setup
(WPS)
Before you begin, make sure that:
•
The access point (wireless router) is WPS‑certified or WPS‑compatible. For more information, see the
documentation that came with your access point.
•
A wireless network adapter is installed in your printer. For more information, see the instructions that came
with the adapter.
•
Active Adapter is set to Auto. From the control panel, navigate to:
Settings > Network/Ports > Network Overview > Active Adapter
For non-touch-screen printer models, press
Using the Push Button method
1
From the control panel, navigate to:
Settings > Network/Ports > Wireless > Wi‑Fi Protected Setup > Start Push Button Method
For non-touch-screen printer models, press
2
Follow the instructions on the display.
> Wireless > > Setup Using Mobile App >
to navigate through the settings.
to navigate through the settings.
34