Table of Contents
Advertisement
Location and Function of Parts and Controls
Front Panel
0
qa
qs
a Tally lamp
You can check the status of the monitor by the color of
the tally lamp.
The tally lamp lights in green according to the setting of
PARALLEL REMOTE in the REMOTE menu.
b Power indicator
When the power is turned on, the power indicator light
in green.
c - (key inhibit) indicator
Lights in green when KEY INHIBIT in the KEY
INHIBIT menu is set to ON.
d CONTROL button
Press to display the buttons on the front panel. Press
again to clear the display.
e CONTRAST buttons
Adjusts the picture contrast.
Press the + button to make the contrast higher or the –
button to make it lower.
f PHASE buttons
Adjusts color tones.
Press the + button to make the skin tones greenish or the
– button to make them purplish.
g CHROMA buttons
14
Location and Function of Parts and Controls
COMPOSITE
Y/C
RGB
COMPONENT
A-1
A-2
B-1
B-2
HD15
DVI
F1
F2
F3
F4
USER MEM
1
Adjusts the color intensity.
Press the + button to increase the color intensity or the –
button to decrease it.
h BRIGHT (brightness) buttons
Adjusts the picture brightness.
Press the + button to increase the brightness or the –
button to decrease it.
i Menu operation buttons
Displays or sets the on-screen menu.
MENU button
Press to display the on-screen menu.
Press again to clear the menu.
+/– buttons
Press to select the items and setting values.
ENTER button
Press to confirm a selected item on the menu.
To display the signal format
When the menu is not displayed and the button is
pressed, the recognized signal format is displayed.
RETURN button
When the menu is displayed and the button is pressed,
the value of an item is reset to the previous value.
Also, when the fan stops, this button blinks.
2
3
4
CONTROL
+
5
CONTRAST
–
+
6
PHASE
–
+
7
CHROMA
–
+
8
BRIGHT
–
MENU
+
9
–
ENTER
RETURN
Advertisement
Table of Contents
