Cortex LP-10 User Manual page 9

2. Install #3 Track support right to #5 Foot pedal bracket with:
- #40 M10x70 Screws
- #49 10 Washers
Repeat for the other side for #2 Track support.
Ensure to tighten all bolts.
3. Install part #4 Bottom frame support to #1 Main frame and #5 Foot pedal using:
- #37 M10x120 Screws
- #46 M6 Nuts
4. Fit part #6 Safety handrail right into the Safety handrail slot on part #2. Then on the side other end of
#6 Safety handrail right, slip it into #8 Back arm rest right.
5. Secure #8 Back arm rest right to #2 Track support right and secure it with:
- #39 M10x75 Screws
- #49 10 Washers
6. Install #10 Track onto part #2 Track support right using #43 M10x20 Screw.
7. Repeat the same on the other side for #10 Track on #3 Track support left.
- #46 M6 Nuts
- #49 10 Washers
- #40 M10x70 Screws
- #46 M6 Nuts
ASSEMBLY INSTRUCTIONS | 9