Cortex LP-10 User Manual page 11

3. Place #20 Adjustment pipe into #19 and lock with #31 Yellow pull pin. You can adjust the position later
for workout.
4. Connect #16 Foot pedal to #5 Front pedal bracket using:
- #49 Ø10 Washers
- #38 M10x100 Screws
- #46 M6 Nuts
5. Secure #17 Weld against the back to #21 Back cushion using #50 M8x20mm Countersunk head bolt.
6. Secure #18 Seat plate welding to #22 Seat cushion using #50 M8x20mm Countersunk head bolt.
7. Place the seat cushion into the slots at the bottom of #2 and #3.
8. #21 Back cushion can be slotted into #16 Foot plate when doing a leg press or removed when
performing a hack squat.
ASSEMBLY INSTRUCTIONS | 11