Menu Settings; Menu Control (Dtv Mode); Channel - Strong SRT 24HC3023 User Manual

GREEN Set a reminded to event or set even Timer function.
YELLOW Overview of previous day
BLUE Overview of next day

5.0 MENU SETTINGS

Below items depend if they are available of select input source. Use SOURCE to select other source.
Selections are Satellite, DTV, ATV, AV, PC, SCART, Component, HDMI and Media.

5.1 Menu control (DTV mode)

Press MENU to enter the main menu. Press   to select an item. Press  and ENTER to select the
submenus. Press MENU to exit the item.

5.2 Channel

Press MENU to display the main menu. Press   to select Channel in the main menu. Press  to
select the option you wish to adjust in the Channel menu.
Press ENTER to adjust. After finish your adjustment, press MENU to save and return to the previous
menu. Below items depend if they are available of select input source. Use SOURCE to select other
source.
5.2.1 Auto Tuning
Press  to select Auto Tuning. If the TV use DVB-T or DVB-C tuner please refer to chapters 3.2 and 3.3;
for Satellite (DVB-S) tuner please refer to chapter 3.1.
5.2.2 Dish Setup
If you use Satellite as input source, the Dish Setup menu allow you to set you satellite and belonging
settings as DiSEqC port and LNB type. Afterwards you may start the Auto Tuning or Manual Tuning by
selecting with EPG button the wanted transponder.
5.2.3 DTV Manual Tuning (in DVB-T mode only)
Search and store programmes manually. Press  to select DTV Manual Tuning. Then press ENTER to
enter the sub-menu.
Press   to select a Channel No., and then press ENTER to start the search. The search stops when a
programme is found and this programme will be stored in the current channel position. Press MENU to
exit.
5.2.4 ATV Manual Tuning (in DVB-C mode only)
First select the source type of ATV. Then in the Channel menu, select ATV Manual Tuning and press
ENTER to access. Highlight and press  to select Storage To 1 (maybe other number), Sound System
and Channel No.. Then select search and press ENTER to start the search. Press  for the unit to search
towards higher frequency. Press  for the unit to search towards lower frequency. The search stops
when a programme is found and this programme will be stored in the current channel position. If you
want to stop the search, press MENU.
Current CH
Colour System
Set the channel number
Select the colour system (Available: AUTO, PAL, SECAM)
9