4-UNPACKING
PREPARATION AND UNPACKING
The product is supplied in a single package.
Open the package, remove any straps, cardboard and polystyrene and take the appliance off the pallet.
To remove the product from the pallet you must extract the movable part of the insert and take out the four Phillips screws securing it to
the pallet. Once the insert has been extracted, before removing the screws, it is advisable to place a support "A" under the movable part
of the insert so as to work safely.
A
x
x
The appliance must always be carried upright, taking care with its moving parts. Pay particular attention to the door and its glass,
protecting them from mechanical knocks that would compromise their integrity.
The product must always be handled with care. If possible unpack the product near the place of installation. The packaging materials are
neither toxic nor harmful, and therefore no particular disposal measures are required. Therefore, the end user is responsible for product
storage, disposal or possible recycling in compliance with the relative applicable laws in force.
If the product must be connected to an exhaust pipe that goes through the rear wall (to enter the flue), make sure not to force it in.
25
Technical Dept. - All rights reserved - Reproduction prohibited