Table 5-3: Pull-Chain Wiring Terminations; Figure 5-5. Distributed Bypass Pull-Chain Wiring Without Mobs - Eaton 9395-275 User And Installation Manual

Figure 5-5. Distributed bypass Pull-Chain wiring without MOBs

NOTE
Use twisted pair wiring between the UPS and MOB AUX contacts.
From UPS 1
TB2-1
(Pull Chain)
TB2-2
(Pull Chain)

Table 5-3: Pull-Chain wiring terminations

1027212
Revision E
To UPS 2
TB2-1
(Pull Chain)
TB2-2
(Pull Chain)
UPS 225 - 275 kVA/300kVAPF0.8
User's and Installation Guide
To UPS 3 (if installed)
TB2-1
(Pull Chain)
TB2-2
(Pull Chain)
To UPS 4 (if installed)
TB2-1
(Pull Chain)
TB2-2
(Pull Chain)
49