Advertisement
cleaned with a vacuum cleaner. If it is dirty or contaminated with oil or
petrol, replace it.
Clean the cover and inside of the air box with a clean cloth. Evenly apply a
thin layer of oil to the outside of the cartridge filter with a brush (you can
use clean engine oil for this). Replace the filter cartridge in its housing and
then replace the lid of the air box, ensuring that each component is in
place and properly installed.
Adjusting the transmission cable
In its transmission ‐ engaged position, the mower's advance lever is
pushed fully towards the handlebar. An incorrectly‐adjusted transmission
cable can cause premature wear to the mower's drive system.
If the transmission cable is too tight, it will be difficult to move the advance
lever towards the handlebars. Conversely, if the transmission cable is not
tight enough, the transmission will function poorly and will lack power.
To adjust the tension of the cable transmission, increase or reduce the
length of the adjustment device using the key. Check the effectiveness of
the transmission and the resistance of the lever.
Once proper adjustment has been reached, secure the adjustment device
by tightening the lock nuts.
20
Advertisement
