Advertisement
f)
Setting of the cutting height
According operation to be performed, adjust the desired cutting
65mm, 8
positions); Grasp the lever, pull it to the right and then lower it to
decrease the cutting height or raise it to increase the cutting height
4. FILLING FUEL TANK
a. Filling tank
WARNING! Gasoline is extremely flammable.
Store fuel in specially designed cans for this purpose.
Fill the fuel tank only outdoors and before starting the engine. Do not
smoke when filling the fuel tank or handling fuel.
Never open the fuel tank cap and never add fuel while the engine is
running or when it is hot.
If fuel has spilled, do not start the engine any further, move the tool away
from where the fuel has been spilled, and be careful not to create a spark
or flame until the fuel vapors have dissipated.
Fully close all fuel tank and fuel canisters.
Before tilting the mower to maintain the blade or drain the oil, empty the
fuel tank.
WARNING: Never fill the fuel tank indoors, while the engine is running,
or before the engine has cooled down for at least 15 minutes after use.
CAUTION: Do not use unapproved gasoline, such as E15 and E85. Do
not mix the oil with gasoline or modify the engine to operate with
alternative fuels. The use of unapproved fuels will damage the engine
parts and will void the engine warranty. To protect the fuel system from
scale formation, add a fuel stabilizer to the fuel. All fuels are not identical.
If startup or performance problems occur, change supplier or fuel brand.
height(25-
13
Advertisement
