System Configuration; Setting The Date/Time; Buzzer Beep - Bosch FPC-500 Installation Manual

Conventional fire panel
Navigating with the arrow keys
i
ACK
Exiting submenus
RESET
4.1

System Configuration

In the System Config menu, you can specify basic settings for
your fire panel.
4.1.1

Setting the Date/Time

1
1
ACK
Repeat the steps to set the month, year, hour, and minute.
4.1.2

Buzzer Beep

1
Bosch Sicherheitssysteme GmbH
Use the arrow keys to navigate in the menu.
Using the arrow keys stops autoscrolling in the
menus.
Confirm your selection in the menu with the ACK
key.
ESC
In the menu and in the submenus, you can jump to a
higher level or cancel the setting using the RESET
(ESC) key.
Hold the RESET (ESC) key down for 2 seconds to
jump to the uppermost level.
Press zone key 1. This takes you to the System
Config menu.
Press zone key 1.
You can now set the date and time.
To save the currently displayed value, press the ACK
key.
Press zone key 1. This takes you to the System
Config menu.
System Configuration | en
2020.02 | 9.0 | F.01U.172.980
29