Eol Elements - Bosch FPC-500 Installation Manual

30 en | System Configuration
2
1
4.1.3

EOL Elements

You can use EOL Devices to specify whether you want to use
resistors or EOL modules for zone termination.
1
3
1
1 2 3 4 5 6 7 8
CS TH: mA
If you select With 4W Module, you must specify the threshold
for the creeping short-circuit.
You can calculate this using the battery calculator included on
the CD.
2020.02 | 9.0 | F.01U.172.980
Press zone key 2.
This takes you to the Keypad Tone submenu.
Press zone keys 1 or 2:
2
... – 1=On (default setting)
– 2 Off
Press zone key 1. This takes you to the System
Config menu.
Press zone key 3.
This takes you to the EOL Devices submenu.
Press zone keys 1 to 3:
3
... – 1=Resistor (default setting, not EN 54‑13
compliant)
– 2 Only 2W Module
– 3 With 4W Module
Conventional fire panel
Bosch Sicherheitssysteme GmbH