Connection To The Factory Monitor - v.link r.LINK RL2-DVD900 Manual

2.4. Connections to the factory monitor
Remove factory monitor.
Connect female 8pin connector of the GVIF cable to the male 8pin connector of the
interface.
Remove female GVIF connector from the rear of the factory monitor and connect it
to the GVIF connector of the GVIF cable.
Connect female GVIF connector of the GVIF cable to the male GVIF connector of the
factory monitor.
Version 01.07.2016
All manuals and user guides at all-guidesbox.com
RL2-DVD900