Table of Contents
Advertisement
B.1
Assembly and Handling Precautions
1.
Do not apply rough force — such as bending or twisting — to the module during
assembly.
2.
Assemble or install module into user's system in clean working areas. Dust and
oil ingress may result in an electrical short or damage to the polarizer.
3.
Do not pressure or force the module as doing so may damage the LCD panel
and/or backlight.
4.
Always follow the correct power sequence when the LCD module is connecting
and operating. This prevents damage to the CMOS LSI chips during latch-up.
5.
Do not pull the I/F connector in or out during module operation.
6.
Do not disassemble the module.
7.
Use a soft dry cloth without chemicals for cleaning.
8.
Allowing moisture to enter or contact the LCD module is dangerous. Moisture
may damage the LCD module when operating.
9.
High temperatures or humidity may reduce the module's performance. Store the
LCD module in specified storage conditions.
10.
Ambient temperatures lower than 10 °C; 50 °F may reduce the display quality.
For example, the response time may grow slower.
B.2
Storage Precautions
1.
Do not leave the module in high temperatures or humidity for long periods of
time. We advise storing the module in environments with temperatures between
0 ~ 35 °C;32 ~95 °F and relative humidity of less than 70%.
2.
Do not store the module in direct sunlight.
3.
The module should be stored in a dark place. It is prohibited to apply sunlight or
fluorescent light in storing.
B.3
Operation Precautions
1.
The LCD product should be operated under normal condition.
Normal condition is defined as below:
Temperature: 20 ± 15 °C; 68 ± 59 °F
Humidity: 65 ± 20%
Display pattern: continually changing pattern (not stationary)
2.
Direct sun light will shorten the life of the product. Please avoid.
3.
If the product will be used in extreme conditions such as those with high tem-
peratures, humidity, altitude, or display pattern or operation time etc. We
strongly recommend contacting Advantech for application engineering advice.
Otherwise, its reliability and functionality is not be guaranteed.
B.4
Safety Precautions
1.
If the liquid crystal material leaks from the panel, it should be kept away from the
eyes or mouth. In case of contact with hands, skin or clothes, it has to be
washed away thoroughly with soap.
2.
After the module' end of life, it is not harmful in case of normal operation and
storage.
IDK-1115WP-45FHA2 User Manual
30
Advertisement
Table of Contents
