Load Oven - Despatch LCC Series Owner's Manual

C244, 320207, REV B

6.2. Load Oven

Caution!
ITW EAE - Despatch Industries cannot be responsible for either
the process or process temperature used, or for the quality of the
product being processed. It is the responsibility of the purchaser
and operator to see that the product undergoing processing in a
ITW EAE - Despatch Industries' LCC/LCD oven is adequately
protected from damage.
Carefully following the instructions in this manual will assist the
purchaser and operator in fulfilling that responsibility.
Avoid spilling on the heater elements or oven floor when loading the oven. Do not
place the load on the oven floor plate. Placing the load on the oven floor may
cause the load to heat unevenly, and the weight may cause shorting out of the
heater elements. Use the shelves provided.
Caution!
Always place loads on the shelves provided to avoid possible
uneven heating and damage to the oven.
The two shelves are designed to be pulled out about halfway without tipping. Do
not overload the shelves. Shelve support capacity is listed in the Capacities
(Section 2.3). Do not overfill your oven. Distribute the workload evenly so airflow
is not restricted. The workload should not take up more than two-thirds of any
dimension of the inside cavity.
52 of 82 ©2021 ITW EAE. All rights reserved. Despatch is a registered trademark in the U.S. and other
countries. No part of the contents of this manual may be reproduced, copied or transmitted in any form
or by any means without the written permission from ITW EAE - Despatch, unless for purchaser's
personal use.
LCC_LCD1-16/51 Oven Owner's Manual