Assembly & Setup; Unpacking, Inspection And Reporting Damages; Unpacking And Inspection - Despatch LCC Series Owner's Manual

LCC_LCD1-16/51 Oven Owner's Manual
Danger!
All grounding and safety equipment must be in compliance with
applicable codes, ordinances and accepted safe practices.
Danger!
This equipment must be installed by a licensed electrician who is
experienced with combustion safeguard control systems and
understands the functions of an interlocking switch such as gas
pressure switches.
If any warning, danger, or information sign has been damaged or

lost, contact the customer service department of ITW EAE -
Despatch Industries, Inc. for replacement.

5.1. Unpacking, Inspection and Reporting Damages

5.1.1. Unpacking and Inspection

Remove all packing materials and thoroughly inspect the oven for damage of any
kind that could have occurred during shipment.
•
Check whether the carton and plastic cover sheet inside the carton
are still in good condition.
•
Inspect all outside surfaces and corners of the oven for scratches and
dents.
•
Check the oven controls and indicators for normal movement, bent
shafts, cracks, chips or missing parts such as knobs and lenses.
•
Check the door and latch for smooth operation.
©2021 ITW EAE. All rights reserved. Despatch is a registered trademark in the U.S. and other
countries. No part of the contents of this manual may be reproduced, copied or transmitted in any form
or by any means without the written permission from ITW EAE - Despatch, unless for purchaser's
personal use.
5. ASSEMBLY & SETUP
C244, 320207, REV B
31 of 82