Daikin Clima-Flex IOM CLIM Series Installation, Operation And Maintenance Manual page 66

Problem Possible causes
The set temperature value is an incorrect
setting.
The equipment Equipment
works, but does not refrigerant.
cool sufficiently.
High condensing temperature.
Equipment does not have sufficient water
flow.
No supply voltage.
The fan does not Motor defective.
work.
Motor thermal protection switch open.
iom-clim-cf-eng
does not have enough
66
Troubleshooting Chart
Possible corrective actions
Establish values.
Check the data sheet and check the system for leaks.
Check condenser and repair.
Check technical data, check filter in water line and adjust flow
if necessary.
Check electrical circuit (line down).
Contact the manufacturer.
Check operating conditions, if necessary contact the
manufacturer.
www.clima-flex.com