Snapmaker Dual Extrusion 3D Printing Module Quick Start Manual page 6

1.6 Parts List
Dual Extrusion Module
Quick Start Guide
MAKE SOMETHING WONDERFUL
Dual Extrusion
Quick Start
Module ×1
Guide ×1
Filament Holder Filment Tube ×2
+ Filment Tube Holder
Tube ×1
Calibration Card ×1 Cable Clip ×2
×1 ×4
Double End Studs M4×12 Screw
10
Filament Holder ×1
Thumb Screw
Sheet ×1
Breakaway PLA ×1 Wiping Cloth ×1
×1
Filament Tube Clip ×2 Wire Brush ×1
M4×10 Screw ×5 Sliding Nut ×1
1.7 Used Symbols
Ignoring this type of message might result in malfunction or
WARNING
damage of the product and injuries to users.
CAUTION
Details you should be aware of throughout the process.
Provides supplementary information for a better
EXPLANATION
understanding of the instruction.
TIPS Tips offer you convenient operations and additional options.
ORIENTATION Make sure that the highlighted part is facing the right way.
1.8 Preparations
1.8.1 Software Update
Download the latest version of Snapmaker Luban
com/snapmaker-luban. If you have already installed Snapmaker Luban on your
computer, ensure that its version is 4.5.0 or later. This guide takes version 4.5.0 as a
demonstration.
Before You Start
from https://snapmaker.
11