Snapmaker Dual Extrusion 3D Printing Module Quick Start Manual page 3

BEFORE Before You Start
1.1 Disclaimer
YOU
Make sure that anyone who uses this product knows and understands the contents
of the Quick Start Guide. Failure to observe this guide may lead to personal injury,
inferior results, or damage to the Snapmaker products. Snapmaker does not assume
START
responsibility and expressly disclaims liability for any personal injury, inferior
results, or damage to the product arising out of or in connection with your improper
operations or failure to follow the instructions of the guide.
When using Snapmaker products, you should comply with the following
requirements:
- Follow the instructions of this guide, the applicable laws and regulations, and the
safety regulations in the assembly, handling, storage, use, maintenance, or disposal
of this product.
- Ensure there is no infringement on any third-party intellectual property rights or
violation of any applicable laws or regulations when making objects using this
product.
The conditions or methods of using Snapmaker products are beyond the control
of Snapmaker. For this reason, Snapmaker does not assume responsibility and
expressly disclaims liability for any consequences resulting from:
- your improper methods, failure to follow the instructions of this guide or impacts of
other uncertain factors when operating this product;
- your infringement on any third-party intellectual property rights or violation of any
applicable laws or regulations when making objects using this product;
- personal injury, inferior results, or damage to the product arising out of or in
connection with the assembly, handling, storage, use, maintenance, or disposal of
this product.
All the Snapmaker filaments are compatible with this product and have been tested
for safety. If you use this product with third-party filaments, Snapmaker does not
assume responsibility and expressly disclaims liability for any adverse effects from
the use or performance of these filaments.
4 5