Adjustment; Steering Friction; Throttle Grip Friction - TOHATSU MFS 4D Owner's Manual

48

ADJUSTMENT

ENOM00073-0

1. Steering friction

Tiller handle type
ENOW00074-1E
Do not over tighten the steering friction
adjustment screw or it could result in diffi-
cult handling of the outboard motor, result-
ing in the loss of control causing an accident
and could lead to severe injury.
ENON00506-0
Note
The steering friction adjustment screw is
used to adjust the friction load of the
steering, but not to fix the steering. Excess
tightening of the adjustment screw may
cause damage to the swivel bracket.
ENOM00544-0
Steering friction can be adjusted in
accordance with your preference by
turning the steering friction adjustment
screw.
9
1. Steering friction adjustment screw
2. Increase
3. Decrease
WARNING
1
2
3
ENOF00444-A
EENOM00074-A

2. Throttle grip friction

ENOW00074-1B
WARNING
Do not overtighten the throttle adjustment
screw or it could result in difficult handling
of the outboard motor, resulting in the loss
of control causing an accident and could
lead to severe injury.
Friction adjustment of the throttle grip
can be made with the throttle adjustment
screw.
2
3
1. Increase
2. Decrease
3. Throttle friction adjustment screw
1
ENOF00445-A