Starting The Engine - TOHATSU MFS 4D Owner's Manual

34
ENGINE OPERATION
ENOW00404-0
When using integral tank, disconnect fuel
connector.
ENOW00947-0
When using a separate tank, be sure that the
fuel line is not kinked and is connected
securely.
4. If you use a separate tank, connect
the fuel connector to the engine side
with pushing fuel connector lever.
And then, connect the fuel connector
to the fuel tank side.
7
1
1. Fuel connector
2. Push
3. Insert
1. Pull
2. Insert
CAUTION
CAUTION
3 3
2 2
ENOF00423-0
2
1
ENOF00861-A
5. Squeeze primer bulb until it becomes
stiff to feed fuel to carburetor. Point
the arrow mark upward when priming.
1
2
1. Engine side
2. Fuel tank side
Do not squeeze primer bulb while engine
running or when the outboard motor is
tilted up to avoid fuel from overflowing.
ENOM00045-C

2. Starting the engine

ENOW00958-1
WARNING
Do not remove or install the top cowl
after the engine has started.
The exposed rotating engine parts cause
serious injury.
ENOW00959-0
CAUTION
The top cowl must be installed while the
engine running except in an emergency. If
the top cowl is not installed correctly, water
splash can damage the engine.
ENOW00036-1A
CAUTION
When starting the outboard motor in the
test tank, make sure that:
ENOF00862-0