TOHATSU MFS 4D Owner's Manual page 55

Description
Outer Equipment
Anode
*1: Have this handled by your dealer.
Outboards used in rental, commercial, or other under severe condition as described
below in detail require more frequent inspections and maintenance than shown in this
manual.
Continuous operation at maximum engine speed
Continuous operation at idling or trolling speed
Operation without appropriate warm up
Stopping without sufficient time for the engine to cool down
Frequent sudden acceleration and sudden deceleration
Frequent stop start operation
Frequent shifting operation
Frequent operation in acidic, polluted, muddy, sandy, or shallow water
Appropriate maintenance can prolong your engine life.
Consult your Tohatsu authorized dealer for suitable maintenance interval depending on
operating and environmental conditions.
Inspection intervals
Every
First 20 Every 50 Every 100
200
hours or hours or hours or
hours or
1 month 3 months 6 months
1 year
INSPECTION AND MAINTENANCE
Inspection procedure
Check for corrosion.
Check for corrosion and deformation.
55
Remarks
Replace if neces-
sary.
10