TOHATSU MFS 4D Owner's Manual page 37

1. Cowl latch
2. Disconnect the rink of the starter
lock rod.
3. Remove the bolts (3 pcs) and remove
the recoil starter.
4. Insert the knotted end of the starter
rope into the notch in the flywheel
and wind the rope clockwise around
the flywheel several turns.
1
ENOF01521-1
5. Tie a loop in the another end of the
emergency starter rope and attach
socket wrench, Both the loop and the
wrench are provided in outboard
motor box.
ENOW00860-0
Be sure to keep the harness away from the
rotation parts.
6. Be sure to install the stop switch lock
ENOF00433-0
to the stop switch, and attach the
stop switch lanyard securely to the
operator or to the operator's PFD
(Personal Flotation Device.)
7. Set the shift lever in the Neutral posi-
tion.
8. Pull the starter handle slowly until you
feel engagement, keep pulling till you
feel less resistance. Then pull it
quickly.
ENOF00434-0
ENGINE OPERATION
ENOF00435-0
CAUTION
ENOF00436-0
37
7