Specifications - MKS Ophir IPM User Manual

USER MANUAL

2 Specifications

This section contains COPIES of the spec sheets for each of the 3 units of the IPM system available at the
time of publishing the User Manual. For the LATEST specifications, please check the Ophir website.
INTRODUCTION
•
Based on the tried-and-true 10K-W sensor, the new IPM modular industrial sensor for measuring the average power of high-power lasers
up to 11kW is ideal for tough industrial use. Ruggedized by design, it has all the features needed for reliable, fail-safe operation in a
tough operational environment. Its modular design provides the flexibility needed to address customers' specific needs.
•
The IPM-10KW has heavy duty connectors and an interlock output. For more protection, the user can order the IPM-Shutter10 which
provides an automated shutter with a field replaceable anti reflective coated window (see next section). Integration into modern
automation systems is available with the IPM-COM communication module (EtherNet and Profinet).
IPM-10KW Industrial Sensor
• lSO17025 NIST & PTB traceable calibration
• Measure up to 11kW
• Modular architecture
• Heavy duty design with industrial interface and connectors
• Interlock to protect from overpower or cooling water failure
• Real time visibility, traceability and logging for predictive maintenance
Model
Use
Control
Absorber Type
(a)
Spectral Range µm
Aperture mm
Power Mode
Power Range
Power Scales
Power Noise Level
Backscattered Power
Maximum Average Power Density kW/cm
Response Time with Meter (0-95%) typ. s
Response Time with Meter (0-99%) typ. s
Power Accuracy ±%
Repeatability ±%
Linearity with Power ±% (0-100% range)
Linearity with Power ±% (0-90% range)
Energy Mode
Energy Range
Energy Scales
Energy Accuracy
Minimum Energy J
Maximum Energy Density J/cm
Cooling
Minimum Water Flow Rate
Water Connectors
Weight kg
(e)
Connectors
6 | IPM USER MANUAL
IPM-10KW
Laser power measurement in industrial environment up to 11kW
RS232
Beam deflector + broadband absorber
0.9-1.1µm, 10.6µm
Ø45mm
100W – 11KW
11KW / 6KW / 600W
5W
(b)
~3.5%
2 (c)
See note and table
2.7
10
(a)
5
0.4
2
1.5
60J – 10KJ
10KJ / 5KJ / 500J
Additional 2% error to power accuracy
60
2 (1)
See table
(d)
Water
8 liter/min at full power
Quick connector for 12mm OD nylon tubing (see page 86)
5
Interlock, M8 male, 3-pin
RS232, M12 female 5-pin
Flow meter – M8 female, 6-pin
Power/IPM-COM, M12 male, 5-pin
7Z07106 - REV 2 - 25/OCT/2022
(1)
below
below
(d)
IPM-10KW